 |
|
Video Capture Master /
Home |
|
|
 |
|
Do you want to grab real-time
video or image?
Video Capture Master is a hot piece of application
designed to suit your needs. With it you can effortlessly
record video and image from Webcam, TV Tuner card,
digital video, digital camera and other capture
devices in real time. It integrates the ability
to control your DV camera or other devices, which
supports device control from Video Capture Master.
With it you can set each capture device's properties,
record real-time video, preview recorded files,
watch TV if TV Tuner is installed, add water mark
or texts on video or image, and much more. Besides,
it supports video and audio recording and is simple
to choose codec. The captured video files can be
saved as AVI (using any compression codec) format.
|
|
|
   |
|
|
| Features |
| What's new (version 7.0.0.174) |
|
Version 7.0.0.174 provides new function of dynamic
detection
Version 7.0.0.174 allows setting motion detection
settings such as sensitivity and alarm mode
|
| Version 6.0.0.174 |
|
An incredibly intuitive and easy to use interface
Record video and save it as AVI format
Capture video or image from Video Input Sources with
a USB Capture Device, DV camcorder and TV Tuner.
Set multiple video and audio encoder settings
Set properties of capture device
Send video via email once the recording is completed
Snapshot pictures with the hotkey
Preview and record real-time video
Watch TV if TV Tuner is installed
Browse and edit recorded media files.
|
|
| Video Capture Master is so
easy to use, follow the steps below to capture video or
image from video devices: |
1. Check whether the video device from which you want
to capture files is correctly connected by clicking "Disconnect"
or "Connect".
2. Click "Device Settings" button to set proper settings
such as video input size and video frame rate for input
video device.
3. Click "Settings" button to set proper settings
for your output file. You can:
>> Select output format on Codec
tab.
>> Set time and interval for
your video capturing task in Shot Frame tab.
>> Add water mark such as images,
words or icon on video files in the Overlay tab.
>> Adjust video effect in Video
Effect tab.
4. Click "Capture Settings" button to set desired
settings for your capturing task. You can
>> Select desired output path
to save your captured files and adjust desired volume and
balance parameters.
>> Check or uncheck the boxes
to perform corresponding operations.
5. After you confirm all settings, click "Start"
button to capture video from video device.
Click "Shot Frame" button to start capturing image
from video device.
|
|
|
| Users' comments: |
| I have thoroughly researched the current software offerings
in the Video Capture design market and I can say this without
hesitation: nothing else comes close to this for Video Capture.
It not just the best at what it does, it's the only one
that does what it does. You can spend 3 times this price
on other Video Capture programs and still come up short.
—Crystal
|
|
|
| I have been searching for a program that is powerful
and flexible, yet simple to use. Some other programs that
I used didn't meet my expectations. Then, I found this one.
This program is very powerful and flexible. It is so intuitive
that you don't need to spend a lot of time to learn this
program. —Leon
|
|
|
| Certification |
Home
